Skip to content

Gemini 3.8 Flash (effort medium · thinking on) on Animate a fish tank with swimming fish and rising bubbles in one self-contained HTML file

GGemini 3.8 Flashmedium · thinking on · Antigravity CLI 1.4.5 (agy -p) · cloud · 2026-10-22 · by @bobsiopener

Trust 80%Fully autonomoussuccess · first try
Estimated cost
$0.51
Wall time
4m
Human step-ins
0
Outcome
Pass

Compare with other models on this task →

Summary

Exact prompt

# Animate a fish tank with swimming fish and rising bubbles in one self-contained HTML file Make a small animated scene: a fish tank. Write one file, `out/scene.html`, that works opened straight from disk with no network access. `spec.json` gives the page title, the stage size and the scene parameters. **Looks are not scored**: the page is opened in a headless browser (800x600 window, UTC time zone, network blocked) and checked by objective tests only. ## Scene contract - Draw the scene on one `<canvas>` or `<svg>` stage of `width` x `height` CSS pixels (spec.json), visible on load, with `<title>` containing spec.json `title`. - Animate continuously from load (`requestAnimationFrame` or timers); no click is needed unless stated below. - Expose `window.sceneState()`, returning the scene's current state in stage pixel coordinates (origin top-left of the stage): `{fish: [{x, y}, ...], bubbles: [{x, y}, ...]}`. Extra fields are fine. It must describe what is actually drawn. - Bubbles may restart at the bottom once they reach the top; keep each bubble at the same array index. - The page must log no errors and throw no exceptions. Keep the file at most 200,000 bytes; no external scripts, fonts, images or URLs (inline everything). ## Checks (partial credit = share passed) 1. `self_contained`: `out/scene.html` exists, is at most 200,000 bytes, references no http(s) or protocol-relative URL, and requests nothing from the network when opened. 2. `has_canvas_or_svg`: a visible `<canvas>` or `<svg>` of at least 300x200 CSS pixels is on the page. 3. `frames_change`: over 3 s, some later screenshot differs from the first in at least 0.1% of pixels, and at least 3 of 30 screenshots differ. 4. `fish_swim`: `sceneState().fish` has exactly spec.json `fish` entries, every fish moves more than 2 px between samples 1.5 s apart, and every fish stays inside the stage. 5. `bubbles_rise`: `sceneState().bubbles` has at least `min_bubbles` entries and at least 60% of them move up (y decreases by more than 1 px) between samples 1.5 s apart. 6. `no_console_errors`: no uncaught exception, `console.error` or browser error is logged during the run. ## How this run works - Work on your own: nobody will answer questions in this task, and writing to `ask/` counts against the run. - Write only under `out/`. Create `out/` if it is missing. Inputs are synthetic; don't fetch anything from the network. - Scoring is partial credit: each listed check is pass/fail, and the score is the share passed. Numbers are compared to within 0.005 unless the task says otherwise.

Original benchmark task written for usecaserank.com. Headless, offline run on a reproducible fixture. Cost shown is a list-price API-equivalent estimate (run on a Google account via Antigravity CLI, not billed per token).

Success criteria: self_contained has_canvas_or_svg frames_change fish_swim bubbles_rise no_console_errors

Setup notes: Use Case Scout batch28 case d01-aquarium-fish-and-bubbles (offline fixture). Prepared with batch28/prepare.sh on the shared box; only TASK.md + starting files went to the agent machine, hidden keys stayed on the box. Prompt = TASK.md verbatim. Flags: -p --model gemini-3.8-flash-medium --sandbox --dangerously-skip-permissions --disable-slash-commands --output-format stream-json, cwd=workdir. Scored on the box with `MEDIA_DIR=<dir> python3 score.py WORKDIR KEYDIR`. Single run, no retries, no human input. Gallery media (3 s headless-Chrome capture: poster.png + clip.mp4, network blocked) written to a fresh MEDIA_DIR by the scorer; SHA-256 in evidence.media. Requested model gemini-3.8-flash-medium (effort medium); priced at the base model row gemini-3.8-flash (pricing.json, https://ai.google.dev/gemini-api/docs/pricing). Score: 6/6. Cost is an ESTIMATE: measured tokens x pricing.json list price (Google account, nothing billed per token); output_tokens include thinking tokens. Tool calls 42 (0 failed). Single run.

Estimated cost List-price estimate; not actually billed.

Output

Metrics

Estimated cost
$0.51
Wall time
4m
Human step-ins
0
Turns
43
Model usage
ModelInput tokOutput tokCost
GGemini 3.8 Flashgoogle/gemini-3.8-flasheffort medium · thinking on2,254,02444,632$0.51

Reproduce this run

  1. Use the use case prompt on the use case page.
  2. Same setup: Gemini 3.8 Flash (google/gemini-3.8-flash, effort medium · thinking on) via Antigravity CLI 1.4.5 (agy -p), cloud.
  3. It counts as a success only if it meets every success criterion: self_contained has_canvas_or_svg frames_change fish_swim bubbles_rise no_console_errors
  4. Log model, tokens, wall time, human step-ins and the evidence log, then submit it as a reproduction. A different model? Submit a head-to-head rerun.

How runs are scored: Methodology.

Was this useful?

⇄ Rerun on another model

Automated checks

Trust 80% comes from these checks (how Trust % works).

Evidence log
{"event": "init", "conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "init": {"model": "gemini-3.8-flash-medium", "cwd": "/home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work", "tools": ["ask_custom_permission", "ask_permission", "ask_question", "browser_click_element", "browser_drag_pixel_to_pixel", "browser_get_dom", "browser_get_network_request", "browser_input", "browser_list_network_requests", "browser_mouse_down", "browser_mouse_up", "browser_move_mouse", "browser_press_key", "browser_refresh_page", "browser_resize_window", "browser_scroll", "browser_scroll_dom", "browser_select_option", "browser_subagent", "call_mcp_tool", "capture_browser_console_logs", "capture_browser_screenshot", "click_browser_pixel", "command_status", "define_subagent", "delete_knowledge", "execute_browser_javascript", "find_by_name", "finish", "generate_image", "grep_search", "invoke_subagent", "list_browser_pages", "list_dir", "list_permissions", "list_plugin_accounts", "list_resources", "manage_inbox", "manage_subagents", "manage_task", "multi_replace_file_content", "notebook_edit", "notebook_execution", "open_browser_url", "read_browser_page", "read_resource", "read_url_content", "replace_file_content", "run_command", "run_workflow", "schedule", "search_marketplace", "search_web", "sed_file", "send_command_input", "send_message", "view_file", "wait", "wait_5_seconds", "write_to_file"], "permission_mode": "always-proceed"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 0, "state": "DONE", "step_type": "user_input"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 1, "state": "DONE", "step_type": "agent_response", "duration_seconds": 1.7411452710000002, "usage": {"input_tokens": 8497, "output_tokens": 92, "thinking_tokens": 54, "cache_read_tokens": 0, "total_tokens": 8589}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 2, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 2, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.278160545, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la"}, "output": "Command exited with code 0.\n\nCommand output:\ntotal 24\r\ndrwxr-xr-x 4 bob bob 4096 Oct 22 11:17 .\r\ndrwxrwxr-x 3 bob bob 4096 Oct 22 11:41 ..\r\n-rw-r--r-- 1 bob bob 2575 Oct 22 11:17 TASK.md\r\ndrwxr-xr-x 2 bob bob 4096 Oct 22 11:17 ask\r\ndrwxr-xr-x 2 bob bob 4096 Oct 22 11:17 out\r\n-rw-r--r-- 1 bob bob  117 Oct 22 11:17 spec.json\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 3, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.714701733, "usage": {"input_tokens": 8845, "output_tokens": 66, "thinking_tokens": 15, "cache_read_tokens": 0, "total_tokens": 8911}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 4, "state": "ACTIVE", "step_type": "tool", "tool_name": "read_file", "tool_info": {"name": "read_file", "parameters": {"Path": "/home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/spec.json"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 4, "state": "DONE", "step_type": "tool", "tool_name": "read_file", "duration_seconds": 0.15142374, "tool_info": {"name": "read_file", "parameters": {"Path": "/home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/spec.json"}, "output": "8 lines, 117 bytes"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 5, "state": "DONE", "step_type": "agent_response", "duration_seconds": 1.8260942679999999, "usage": {"input_tokens": 9084, "output_tokens": 77, "thinking_tokens": 26, "cache_read_tokens": 0, "total_tokens": 9161}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 6, "state": "ACTIVE", "step_type": "tool", "tool_name": "read_file", "tool_info": {"name": "read_file", "parameters": {"Path": "/home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/TASK.md"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 6, "state": "DONE", "step_type": "tool", "tool_name": "read_file", "duration_seconds": 0.036138619, "tool_info": {"name": "read_file", "parameters": {"Path": "/home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/TASK.md"}, "output": "23 lines, 2575 bytes"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 7, "state": "DONE", "step_type": "agent_response", "duration_seconds": 1.371483512, "usage": {"input_tokens": 10007, "output_tokens": 61, "thinking_tokens": 23, "cache_read_tokens": 0, "total_tokens": 10068}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 8, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la out"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 8, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.319782183, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la out"}, "output": "Command exited with code 0.\n\nCommand output:\ntotal 8\r\ndrwxr-xr-x 2 bob bob 4096 Oct 22 11:17 .\r\ndrwxr-xr-x 4 bob bob 4096 Oct 22 11:17 ..\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 9, "state": "DONE", "step_type": "agent_response", "duration_seconds": 1.757230123, "usage": {"input_tokens": 10211, "output_tokens": 72, "thinking_tokens": 28, "cache_read_tokens": 0, "total_tokens": 10283}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 10, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "which node python3 chromium google-chrome-stable"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 10, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.364366232, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "which node python3 chromium google-chrome-stable"}, "output": "Command exited with code 1.\n\nCommand output:\n/home/bob/.nvm/versions/node/v26.8.1/bin/node\r\n/usr/bin/python3\r\n/usr/bin/google-chrome-stable\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 11, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.7354034240000002, "usage": {"input_tokens": 10411, "output_tokens": 159, "thinking_tokens": 30, "cache_read_tokens": 0, "total_tokens": 10570}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 12, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"import playwright; print('playwright ok')\" 2>/dev/null || python3 -c \"import selenium; print('selenium ok')\" 2>/dev/null || node -e \"require('puppeteer'); console.log('puppeteer ok')\" 2>/dev/null || node -e \"require('playwright'); console.log('playwright node ok')\" 2>/dev/null || echo \"none\""}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 12, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.518918035, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"import playwright; print('playwright ok')\" 2>/dev/null || python3 -c \"import selenium; print('selenium ok')\" 2>/dev/null || node -e \"require('puppeteer'); console.log('puppeteer ok')\" 2>/dev/null || node -e \"require('playwright'); console.log('playwright node ok')\" 2>/dev/null || echo \"none\""}, "output": "Command exited with code 0.\n\nCommand output:\nnone\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 13, "state": "DONE", "step_type": "agent_response", "duration_seconds": 58.537467507, "usage": {"input_tokens": 10657, "output_tokens": 19637, "thinking_tokens": 18833, "cache_read_tokens": 0, "total_tokens": 30294}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 14, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport math, random\n\n# Test fish motion\nfish_params = [\n    {'cx': 350, 'cy': 180, 'A': 220, 'B': 80, 'T': 7.0, 'phi': 0.0},\n    {'cx': 360, 'cy': 260, 'A': 200, 'B': 90, 'T': 8.5, 'phi': 1.8},\n    {'cx': 330, 'cy': 200, 'A': 240, 'B': 75, 'T': 9.2, 'phi': 3.5},\n    {'cx': 370, 'cy': 280, 'A': 210, 'B': 85, 'T': 7.8, 'phi': 5.0},\n]\n\ndef get_fish_pos(p, t):\n    w = 2 * math.pi / p['T']\n    x = p['cx'] + p['A'] * math.cos(w * t + p['phi'])\n    y = p['cy'] + p['B'] * math.sin(w * t + p['phi'])\n   \u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 14, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.232535467, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport math, random\n\n# Test fish motion\nfish_params = [\n    {'cx': 350, 'cy': 180, 'A': 220, 'B': 80, 'T': 7.0, 'phi': 0.0},\n    {'cx': 360, 'cy': 260, 'A': 200, 'B': 90, 'T': 8.5, 'phi': 1.8},\n    {'cx': 330, 'cy': 200, 'A': 240, 'B': 75, 'T': 9.2, 'phi': 3.5},\n    {'cx': 370, 'cy': 280, 'A': 210, 'B': 85, 'T': 7.8, 'phi': 5.0},\n]\n\ndef get_fish_pos(p, t):\n    w = 2 * math.pi / p['T']\n    x = p['cx'] + p['A'] * math.cos(w * t + p['phi'])\n    y = p['cy'] + p['B'] * math.sin(w * t + p['phi'])\n   \u2026"}, "output": "Command exited with code 0.\n\nCommand output:\nMin fish distance moved over 1.5s: 73.52 px\r\nMin bubble up share over 1.5s: 91.7%\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 15, "state": "DONE", "step_type": "agent_response", "duration_seconds": 3.160664365, "usage": {"input_tokens": 30416, "output_tokens": 684, "thinking_tokens": 156, "cache_read_tokens": 0, "total_tokens": 31100}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 16, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport math\n\nfish_params = [\n    {'cx': 350, 'cy': 180, 'A': 220, 'B': 80, 'T': 7.0, 'phi': 0.0},\n    {'cx': 360, 'cy': 260, 'A': 200, 'B': 90, 'T': 8.5, 'phi': 1.8},\n    {'cx': 330, 'cy': 200, 'A': 240, 'B': 75, 'T': 9.2, 'phi': 3.5},\n    {'cx': 370, 'cy': 280, 'A': 210, 'B': 85, 'T': 7.8, 'phi': 5.0},\n]\n\ndef get_fish_pos(p, t):\n    w = 2 * math.pi / p['T']\n    x = p['cx'] + p['A'] * math.cos(w * t + p['phi'])\n    y = p['cy'] + p['B'] * math.sin(w * t + p['phi'])\n    return x, y\n\nmin_max_d = 9\u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 16, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.691131403, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport math\n\nfish_params = [\n    {'cx': 350, 'cy': 180, 'A': 220, 'B': 80, 'T': 7.0, 'phi': 0.0},\n    {'cx': 360, 'cy': 260, 'A': 200, 'B': 90, 'T': 8.5, 'phi': 1.8},\n    {'cx': 330, 'cy': 200, 'A': 240, 'B': 75, 'T': 9.2, 'phi': 3.5},\n    {'cx': 370, 'cy': 280, 'A': 210, 'B': 85, 'T': 7.8, 'phi': 5.0},\n]\n\ndef get_fish_pos(p, t):\n    w = 2 * math.pi / p['T']\n    x = p['cx'] + p['A'] * math.cos(w * t + p['phi'])\n    y = p['cy'] + p['B'] * math.sin(w * t + p['phi'])\n    return x, y\n\nmin_max_d = 9\u2026"}, "output": "Command exited with code 0.\n\nCommand output:\nMin max(|dx|, |dy|) over 1.5s: 70.29 px\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 17, "state": "DONE", "step_type": "agent_response", "duration_seconds": 24.830444787, "usage": {"input_tokens": 2686, "output_tokens": 10126, "thinking_tokens": 6979, "cache_read_tokens": 28522, "total_tokens": 12812}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 18, "state": "ACTIVE", "step_type": "tool", "tool_name": "write_file", "tool_info": {"name": "write_file", "parameters": {"Path": "/home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/out/scene.html"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 18, "state": "DONE", "step_type": "tool", "tool_name": "write_file", "duration_seconds": 0.056494643, "tool_info": {"name": "write_file", "parameters": {"Path": "/home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/out/scene.html"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 19, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.126706029, "usage": {"input_tokens": 12858, "output_tokens": 100, "thinking_tokens": 24, "cache_read_tokens": 28552, "total_tokens": 12958}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 20, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la out/scene.html && grep -i -E \"http|https|//\" out/scene.html || echo \"No matches (clean!)\""}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 20, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.317583752, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la out/scene.html && grep -i -E \"http|https|//\" out/scene.html || echo \"No matches (clean!)\""}, "output": "Command exited with code 0.\n\nCommand output:\n-rw-r--r-- 1 bob bob 7118 Oct 22 11:43 out/scene.html\r\nNo matches (clean!)\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 21, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.98839997, "usage": {"input_tokens": 4932, "output_tokens": 472, "thinking_tokens": 388, "cache_read_tokens": 36701, "total_tokens": 5404}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 22, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"import urllib.request, json; print('urllib ok')\" && (python3 -c \"import websockets; print('websockets ok')\" 2>/dev/null || echo \"no python websockets\")"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 22, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.4437872, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"import urllib.request, json; print('urllib ok')\" && (python3 -c \"import websockets; print('websockets ok')\" 2>/dev/null || echo \"no python websockets\")"}, "output": "Command exited with code 0.\n\nCommand output:\nurllib ok\r\nwebsockets ok\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 23, "state": "DONE", "step_type": "agent_response", "duration_seconds": 3.457588892, "usage": {"input_tokens": 5503, "output_tokens": 455, "thinking_tokens": 188, "cache_read_tokens": 36695, "total_tokens": 5958}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 24, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, time, json, urllib.request, asyncio, websockets, os\n\nchrome_cmd = [\n    'google-chrome-stable',\n    '--headless=new',\n    '--disable-gpu',\n    '--remote-debugging-port=9222',\n    '--window-size=800,600',\n    'file://' + os.path.abspath('out/scene.html')\n]\n\nproc = subprocess.Popen(chrome_cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)\ntime.sleep(1.5)\n\ntry:\n    resp = urllib.request.urlopen('http://127.0.0.1:9222/json')\n    tabs = json.loads(resp.read().decode())\n    print\u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 24, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.936775328, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, time, json, urllib.request, asyncio, websockets, os\n\nchrome_cmd = [\n    'google-chrome-stable',\n    '--headless=new',\n    '--disable-gpu',\n    '--remote-debugging-port=9222',\n    '--window-size=800,600',\n    'file://' + os.path.abspath('out/scene.html')\n]\n\nproc = subprocess.Popen(chrome_cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)\ntime.sleep(1.5)\n\ntry:\n    resp = urllib.request.urlopen('http://127.0.0.1:9222/json')\n    tabs = json.loads(resp.read().decode())\n    print\u2026"}, "output": "Command exited with code 1.\n\nThere were sandbox errors that may or may not be related to the failure. If you think the failure is because of running in the sandbox, you can run the command again with `BypassSandbox` set to true to request explicit user permission.\n\nCommand output:\nTraceback (most recent call last):\r\n  File \"<string>\", line 17, in <module>\r\n    resp = urllib.request.urlopen('http://127.0.0.1:9222/json')\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 189, in urlopen\r\n    return opener.open(url, data, timeout)\r\n           ~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 495, in open\r\n    response = meth(req, response)\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 604, in http_response\r\n    response = self.parent.error(\r\n        'http', request, response, code, msg, hdrs)\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 533, in error\r\n    return self._call_chain(*args)\r\n           ~~~~~~~~~~~~~~~~^^^^^^^\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 466, in _call_chain\r\n    result = func(*args)\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 613, in http_error_default\r\n    raise HTTPError(req.full_url, code, msg, hdrs, fp)\r\nurllib.error.HTTPError: HTTP Error 400: Bad Request\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 25, "state": "DONE", "step_type": "agent_response", "duration_seconds": 4.864898881, "usage": {"input_tokens": 2380, "output_tokens": 334, "thinking_tokens": 58, "cache_read_tokens": 40767, "total_tokens": 2714}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 26, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, time, json, urllib.request, os\n\nchrome_cmd = [\n    'google-chrome-stable',\n    '--headless=new',\n    '--disable-gpu',\n    '--remote-debugging-port=9222',\n    '--remote-allow-origins=*',\n    '--window-size=800,600',\n    'file://' + os.path.abspath('out/scene.html')\n]\n\nproc = subprocess.Popen(chrome_cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)\ntime.sleep(1.5)\n\ntry:\n    req = urllib.request.Request('http://127.0.0.1:9222/json')\n    resp = urllib.request.urlopen(req)\n    \u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 26, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.918183736, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, time, json, urllib.request, os\n\nchrome_cmd = [\n    'google-chrome-stable',\n    '--headless=new',\n    '--disable-gpu',\n    '--remote-debugging-port=9222',\n    '--remote-allow-origins=*',\n    '--window-size=800,600',\n    'file://' + os.path.abspath('out/scene.html')\n]\n\nproc = subprocess.Popen(chrome_cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)\ntime.sleep(1.5)\n\ntry:\n    req = urllib.request.Request('http://127.0.0.1:9222/json')\n    resp = urllib.request.urlopen(req)\n    \u2026"}, "output": "Command exited with code 1.\n\nThere were sandbox errors that may or may not be related to the failure. If you think the failure is because of running in the sandbox, you can run the command again with `BypassSandbox` set to true to request explicit user permission.\n\nCommand output:\nTraceback (most recent call last):\r\n  File \"<string>\", line 19, in <module>\r\n    resp = urllib.request.urlopen(req)\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 189, in urlopen\r\n    return opener.open(url, data, timeout)\r\n           ~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 495, in open\r\n    response = meth(req, response)\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 604, in http_response\r\n    response = self.parent.error(\r\n        'http', request, response, code, msg, hdrs)\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 533, in error\r\n    return self._call_chain(*args)\r\n           ~~~~~~~~~~~~~~~~^^^^^^^\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 466, in _call_chain\r\n    result = func(*args)\r\n  File \"/usr/lib/python3.13/urllib/request.py\", line 613, in http_error_default\r\n    raise HTTPError(req.full_url, code, msg, hdrs, fp)\r\nurllib.error.HTTPError: HTTP Error 400: Bad Request\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 27, "state": "DONE", "step_type": "agent_response", "duration_seconds": 3.5138935829999998, "usage": {"input_tokens": 3197, "output_tokens": 364, "thinking_tokens": 69, "cache_read_tokens": 40761, "total_tokens": 3561}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 28, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, time, json, urllib.request, os\n\nchrome_cmd = [\n    'google-chrome-stable',\n    '--headless=new',\n    '--disable-gpu',\n    '--remote-debugging-port=9222',\n    '--remote-allow-origins=*',\n    '--window-size=800,600',\n    'file://' + os.path.abspath('out/scene.html')\n]\n\nproc = subprocess.Popen(chrome_cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)\ntime.sleep(1.5)\n\ntry:\n    req = urllib.request.Request('http://localhost:9222/json')\n    resp = urllib.request.urlopen(req)\n    \u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 28, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.852933604, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, time, json, urllib.request, os\n\nchrome_cmd = [\n    'google-chrome-stable',\n    '--headless=new',\n    '--disable-gpu',\n    '--remote-debugging-port=9222',\n    '--remote-allow-origins=*',\n    '--window-size=800,600',\n    'file://' + os.path.abspath('out/scene.html')\n]\n\nproc = subprocess.Popen(chrome_cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)\ntime.sleep(1.5)\n\ntry:\n    req = urllib.request.Request('http://localhost:9222/json')\n    resp = urllib.request.urlopen(req)\n    \u2026"}, "output": "Command exited with code 0.\n\nCommand output:\nHTTPError: 403 Port 9222 not allowed for HTTP\r\n\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 29, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.069779621, "usage": {"input_tokens": 3671, "output_tokens": 204, "thinking_tokens": 141, "cache_read_tokens": 40754, "total_tokens": 3875}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 30, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --disable-gpu --dump-dom file://$(pwd)/out/scene.html"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 30, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.527473494, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --disable-gpu --dump-dom file://$(pwd)/out/scene.html"}, "output": "Command exited with code 134.\n\nThere were sandbox errors that may or may not be related to the failure. If you think the failure is because of running in the sandbox, you can run the command again with `BypassSandbox` set to true to request explicit user permission.\n\nCommand output:\n[31:31:1022/114340.877749:FATAL:sandbox/linux/services/credentials.cc:131] Check failed: . : Function not implemented (38)\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 31, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.043149169, "usage": {"input_tokens": 4075, "output_tokens": 106, "thinking_tokens": 38, "cache_read_tokens": 40747, "total_tokens": 4181}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 32, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --dump-dom file://$(pwd)/out/scene.html"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 32, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.435117873, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --dump-dom file://$(pwd)/out/scene.html"}, "output": "The tool's output was truncated due to being too long. You can find the full output in a file at file:///home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/.system_generated/steps/32/output.txt.\n\nHere is a preview with the middle of the output truncated:\nCommand exited with code 0.\n\nCommand output:\n[31:54:1022/114343.453425:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[31:54:1022/114343.454019:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.482: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.482: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.482: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.482: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.483: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.484: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[31:54:1022/114343.495125:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[31:54:1022/114343.495691:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[31:54:1022/114343.495710:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:54:1022/114343.537964:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:54:1022/114343.600131:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.601: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.620: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:43:43.669: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[31:31:1022/114343.780054:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:54:1022/114343.780135:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:31:1022/114343.780627:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:54:1022/114343.780669:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:31:1022/114343.781834:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:31:1022/114343.784118:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:31:1022/114343.816962:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasO\n<truncated 4954 of 14850 bytes from the middle of the output>\n     b.x = b.baseX + 5 * Math.sin(t * 2.5 + j * 1.5);\r\n    }\r\n  }\r\n\r\n  function draw() {\r\n    ctx.clearRect(0, 0, W, H);\r\n\r\n    /* Background water gradient */\r\n    var bgGrad = ctx.createLinearGradient(0, 0, 0, H);\r\n    bgGrad.addColorStop(0, '#0d324d');\r\n    bgGrad.addColorStop(0.5, '#134e73');\r\n    bgGrad.addColorStop(1, '#1b6b93');\r\n    ctx.fillStyle = bgGrad;\r\n    ctx.fillRect(0, 0, W, H);\r\n\r\n    /* Light rays from surface */\r\n    var nowSec = (performance.now() - startTime) / 1000;\r\n    ctx.save();\r\n    for (var r = 0; r < 5; r++) {\r\n      var rx = 100 + r * 130 + Math.sin(nowSec + r) * 20;\r\n      var rayGrad = ctx.createLinearGradient(rx, 0, rx + 40, H);\r\n      rayGrad.addColorStop(0, 'rgba(255, 255, 255, 0.08)');\r\n      rayGrad.addColorStop(0.8, 'rgba(255, 255, 255, 0.01)');\r\n      rayGrad.addColorStop(1, 'rgba(255, 255, 255, 0)');\r\n      ctx.fillStyle = rayGrad;\r\n      ctx.beginPath();\r\n      ctx.moveTo(rx - 20, 0);\r\n      ctx.lineTo(rx + 20, 0);\r\n      ctx.lineTo(rx + 70, H);\r\n      ctx.lineTo(rx - 30, H);\r\n      ctx.closePath();\r\n      ctx.fill();\r\n    }\r\n    ctx.restore();\r\n\r\n    /* Sandy bottom */\r\n    var sandGrad = ctx.createLinearGradient(0, H - 45, 0, H);\r\n    sandGrad.addColorStop(0, '#d4a373');\r\n    sandGrad.addColorStop(1, '#b07d50');\r\n    ctx.fillStyle = sandGrad;\r\n    ctx.beginPath();\r\n    ctx.moveTo(0, H);\r\n    ctx.lineTo(0, H - 35);\r\n    ctx.quadraticCurveTo(W * 0.25, H - 45, W * 0.5, H - 35);\r\n    ctx.quadraticCurveTo(W * 0.75, H - 25, W, H - 35);\r\n    ctx.lineTo(W, H);\r\n    ctx.closePath();\r\n    ctx.fill();\r\n\r\n    /* Seaweed plants at bottom */\r\n    ctx.save();\r\n    for (var p = 0; p < 7; p++) {\r\n      var px = 40 + p * 100;\r\n      var ph = 70 + (p % 3) * 25;\r\n      var sway = Math.sin(nowSec * 1.8 + p) * 12;\r\n      ctx.strokeStyle = p % 2 === 0 ? '#2d6a4f' : '#40916c';\r\n      ctx.lineWidth = 5;\r\n      ctx.lineCap = 'round';\r\n      ctx.beginPath();\r\n      ctx.moveTo(px, H - 25);\r\n      ctx.quadraticCurveTo(px + sway * 0.5, H - 25 - ph * 0.5, px + sway, H - 25 - ph);\r\n      ctx.stroke();\r\n    }\r\n    ctx.restore();\r\n\r\n    /* Draw bubbles */\r\n    for (var j = 0; j < bubbleList.length; j++) {\r\n      var b = bubbleList[j];\r\n      ctx.save();\r\n      ctx.beginPath();\r\n      ctx.arc(b.x, b.y, b.radius, 0, Math.PI * 2);\r\n      ctx.fillStyle = 'rgba(255, 255, 255, 0.25)';\r\n      ctx.fill();\r\n      ctx.lineWidth = 1.2;\r\n      ctx.strokeStyle = 'rgba(255, 255, 255, 0.7)';\r\n      ctx.stroke();\r\n\r\n      /* Highlight glint */\r\n      ctx.beginPath();\r\n      ctx.arc(b.x - b.radius * 0.35, b.y - b.radius * 0.35, b.radius * 0.25, 0, Math.PI * 2);\r\n      ctx.fillStyle = 'rgba(255, 255, 255, 0.85)';\r\n      ctx.fill();\r\n      ctx.restore();\r\n    }\r\n\r\n    /* Draw fish */\r\n    for (var i = 0; i < fishList.length; i++) {\r\n      var f = fishList[i];\r\n      ctx.save();\r\n      ctx.translate(f.x, f.y);\r\n      ctx.rotate(f.heading);\r\n\r\n      var s = f.size;\r\n      var tailWiggle = Math.sin(f.tailPhase) * 0.35;\r\n\r\n      /* Tail fin */\r\n      ctx.save();\r\n      ctx.translate(-s * 0.8, 0);\r\n      ctx.rotate(tailWiggle);\r\n      ctx.beginPath();\r\n      ctx.moveTo(0, 0);\r\n      ctx.lineTo(-s * 0.6, -s * 0.45);\r\n      ctx.lineTo(-s * 0.4, 0);\r\n      ctx.lineTo(-s * 0.6, s * 0.45);\r\n      ctx.closePath();\r\n      ctx.fillStyle = f.stripe;\r\n      ctx.fill();\r\n      ctx.restore();\r\n\r\n      /* Dorsal fin */\r\n      ctx.beginPath();\r\n      ctx.moveTo(-s * 0.2, -s * 0.38);\r\n      ctx.quadraticCurveTo(0, -s * 0.65, s * 0.2, -s * 0.35);\r\n      ctx.closePath();\r\n      ctx.fillStyle = f.stripe;\r\n      ctx.fill();\r\n\r\n      /* Fish body */\r\n      ctx.beginPath();\r\n      ctx.ellipse(0, 0, s * 0.85, s * 0.45, 0, 0, Math.PI * 2);\r\n      ctx.fillStyle = f.color;\r\n      ctx.fill();\r\n\r\n      /* Body decorative stripe */\r\n      ctx.beginPath();\r\n      ctx.ellipse(0, 0, s * 0.2, s * 0.43, 0, 0, Math.PI * 2);\r\n      ctx.fillStyle = f.stripe;\r\n      ctx.fill();\r\n\r\n      /* Fish eye */\r\n      var eyeX = s * 0.5;\r\n      var eyeY = -s * 0.12;\r\n      ctx.beginPath();\r\n      ctx.arc(eyeX, eyeY, s * 0.12, 0, Math.PI * 2);\r\n      ctx.fillStyle = '#ffffff';\r\n      ctx.fill();\r\n\r\n      ctx.beginPath();\r\n      ctx.arc(eyeX + s * 0.03, eyeY, s * 0.06, 0, Math.PI * 2);\r\n      ctx.fillStyle = '#000000';\r\n      ctx.fill();\r\n\r\n      /* Pectoral fin */\r\n      ctx.beginPath();\r\n      ctx.ellipse(-s * 0.05, s * 0.15, s * 0.25, s * 0.12, Math.PI / 4, 0, Math.PI * 2);\r\n      ctx.fillStyle = f.stripe;\r\n      ctx.fill();\r\n\r\n      ctx.restore();\r\n    }\r\n  }\r\n\r\n  function frame(now) {\r\n    updateScene(now);\r\n    draw();\r\n    requestAnimationFrame(frame);\r\n  }\r\n\r\n  updateScene(startTime);\r\n  draw();\r\n  requestAnimationFrame(frame);\r\n\r\n  window.sceneState = function() {\r\n    updateScene(performance.now());\r\n    return {\r\n      fish: fishList.map(function(f) { return { x: f.x, y: f.y }; }),\r\n      bubbles: bubbleList.map(function(b) { return { x: b.x, y: b.y }; })\r\n    };\r\n  };\r\n})();\r\n</script>\r\n\r\n\r\n</body></html>\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 33, "state": "DONE", "step_type": "agent_response", "duration_seconds": 1.9700096459999998, "usage": {"input_tokens": 8329, "output_tokens": 173, "thinking_tokens": 80, "cache_read_tokens": 40757, "total_tokens": 8502}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 34, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --window-size=800,600 --screenshot=/tmp/screen.png file://$(pwd)/out/scene.html && ls -l /tmp/screen.png"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 34, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.962024616, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --window-size=800,600 --screenshot=/tmp/screen.png file://$(pwd)/out/scene.html && ls -l /tmp/screen.png"}, "output": "Command exited with code 0.\n\nCommand output:\n[33:54:1022/114346.745673:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:54:1022/114346.745821:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.748: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.748: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.748: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.749: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.750: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.750: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[33:54:1022/114346.750496:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:54:1022/114346.750658:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:54:1022/114346.750813:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:54:1022/114346.767281:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:54:1022/114346.794410:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.795: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.799: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:43:46.808: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[33:33:1022/114346.846418:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114346.846484:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114346.846544:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114346.846581:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114346.846688:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:33:1022/114346.847493:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:33:1022/114346.863090:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114346.864104:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:33:1022/114346.864119:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114346.864141:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:54:1022/114346.864153:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114346.881146:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.Properties.GetAll: object_path= /org/freedesktop/UPower/devices/DisplayDevice: unknown error type: \r\n[33:33:1022/114346.881170:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114346.881237:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114346.891668:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114346.892123:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114346.909952:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n\r\n(google-chrome-stable:33): dconf-CRITICAL **: 11:43:47.046: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:33): dconf-CRITICAL **: 11:43:47.050: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:33): dconf-CRITICAL **: 11:43:47.059: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:33): dconf-CRITICAL **: 11:43:47.105: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n56847 bytes written to file /tmp/screen.png\r\n-rw-rw-rw- 1 bob bob 56847 Oct 22 11:43 /tmp/screen.png\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 35, "state": "DONE", "step_type": "agent_response", "duration_seconds": 1.987805839, "usage": {"input_tokens": 3455, "output_tokens": 111, "thinking_tokens": 41, "cache_read_tokens": 48914, "total_tokens": 3566}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 36, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nfrom PIL import Image\nim = Image.open('/tmp/screen.png')\nprint('Image size:', im.size)\n\""}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 36, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.380384611, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nfrom PIL import Image\nim = Image.open('/tmp/screen.png')\nprint('Image size:', im.size)\n\""}, "output": "Command exited with code 0.\n\nCommand output:\nImage size: (800, 600)\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 37, "state": "DONE", "step_type": "agent_response", "duration_seconds": 4.869701078, "usage": {"input_tokens": 3673, "output_tokens": 461, "thinking_tokens": 167, "cache_read_tokens": 48906, "total_tokens": 4134}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 38, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, os, json\n\nr_pipe, w_child = os.pipe()\nr_child, w_pipe = os.pipe()\n\nproc = subprocess.Popen(\n    ['google-chrome-stable', '--headless=new', '--no-sandbox', '--disable-gpu', '--remote-debugging-pipe', 'file://' + os.path.abspath('out/scene.html')],\n    pass_fds=(r_child, w_child)\n)\nos.close(r_child)\nos.close(w_child)\n\n# In Chrome pipe protocol, messages are null-terminated JSON strings.\nmsg = json.dumps({'id': 1, 'method': 'Runtime.evaluate', 'params': {'expression': 'document.\u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 38, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.409840485, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, os, json\n\nr_pipe, w_child = os.pipe()\nr_child, w_pipe = os.pipe()\n\nproc = subprocess.Popen(\n    ['google-chrome-stable', '--headless=new', '--no-sandbox', '--disable-gpu', '--remote-debugging-pipe', 'file://' + os.path.abspath('out/scene.html')],\n    pass_fds=(r_child, w_child)\n)\nos.close(r_child)\nos.close(w_child)\n\n# In Chrome pipe protocol, messages are null-terminated JSON strings.\nmsg = json.dumps({'id': 1, 'method': 'Runtime.evaluate', 'params': {'expression': 'document.\u2026"}, "output": "Command exited with code 0.\n\nCommand output:\n[1022/114354.856910:ERROR:chrome/app/chrome_main_delegate.cc:1113] Remote debugging pipe file descriptors are not open.\r\nReceived: \r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 39, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.666713722, "usage": {"input_tokens": 4278, "output_tokens": 404, "thinking_tokens": 104, "cache_read_tokens": 48900, "total_tokens": 4682}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 40, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, os, json, time\n\nr_pipe, w_child = os.pipe()\nr_child, w_pipe = os.pipe()\n\nos.dup2(r_child, 3)\nos.dup2(w_child, 4)\n\nproc = subprocess.Popen(\n    ['google-chrome-stable', '--headless=new', '--no-sandbox', '--disable-gpu', '--remote-debugging-pipe', 'file://' + os.path.abspath('out/scene.html')],\n    pass_fds=(3, 4)\n)\n\ntime.sleep(1)\n\nmsg = json.dumps({'id': 1, 'method': 'Runtime.evaluate', 'params': {'expression': 'document.title'}}).encode() + b'\\0'\nos.write(w_pipe, msg)\n\nbuf = \u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 40, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.4556731090000001, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nimport subprocess, os, json, time\n\nr_pipe, w_child = os.pipe()\nr_child, w_pipe = os.pipe()\n\nos.dup2(r_child, 3)\nos.dup2(w_child, 4)\n\nproc = subprocess.Popen(\n    ['google-chrome-stable', '--headless=new', '--no-sandbox', '--disable-gpu', '--remote-debugging-pipe', 'file://' + os.path.abspath('out/scene.html')],\n    pass_fds=(3, 4)\n)\n\ntime.sleep(1)\n\nmsg = json.dumps({'id': 1, 'method': 'Runtime.evaluate', 'params': {'expression': 'document.title'}}).encode() + b'\\0'\nos.write(w_pipe, msg)\n\nbuf = \u2026"}, "output": "Command exited with code 0.\n\nCommand output:\n[32:53:1022/114357.899794:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.902: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.902: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.903: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.903: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.903: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.903: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.903: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.903: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.904: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.904: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.904: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.904: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.904: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[32:53:1022/114357.905166:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:53:1022/114357.905294:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114357.905675:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114357.905688:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:53:1022/114357.930473:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:53:1022/114357.955840:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.956: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.960: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:43:57.972: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[32:32:1022/114358.032873:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:32:1022/114358.032926:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114358.032926:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:53:1022/114358.032962:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114358.033055:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:32:1022/114358.033604:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:32:1022/114358.048188:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114358.048235:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114358.048289:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:32:1022/114358.048359:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114358.048394:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114358.063587:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.Properties.GetAll: object_path= /org/freedesktop/UPower/devices/DisplayDevice: unknown error type: \r\n[32:32:1022/114358.063617:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114358.064054:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114358.073505:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114358.073876:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114358.090739:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n\r\n(google-chrome-stable:32): dconf-CRITICAL **: 11:43:58.206: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:32): dconf-CRITICAL **: 11:43:58.211: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:32): dconf-CRITICAL **: 11:43:58.222: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:32): dconf-CRITICAL **: 11:43:58.283: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\nReceived: {\"id\": 1, \"method\": \"Runtime.evaluate\", \"params\": {\"expression\": \"document.title\"}}\u0000\r\n[32:87:1022/114358.805281:ERROR:content/browser/devtools/devtools_pipe_handler.cc:188] Connection terminated while reading from pipe\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 41, "state": "DONE", "step_type": "agent_response", "duration_seconds": 9.367729707, "usage": {"input_tokens": 3742, "output_tokens": 2108, "thinking_tokens": 271, "cache_read_tokens": 52982, "total_tokens": 5850}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 42, "state": "ACTIVE", "step_type": "tool", "tool_name": "write_file", "tool_info": {"name": "write_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 42, "state": "DONE", "step_type": "tool", "tool_name": "write_file", "duration_seconds": 0.130955274, "tool_info": {"name": "write_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 43, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.382422053, "usage": {"input_tokens": 5925, "output_tokens": 347, "thinking_tokens": 37, "cache_read_tokens": 52983, "total_tokens": 6272}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 44, "state": "ACTIVE", "step_type": "tool", "tool_name": "edit_file", "tool_info": {"name": "edit_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 44, "state": "DONE", "step_type": "tool", "tool_name": "edit_file", "duration_seconds": 0.055920205, "tool_info": {"name": "edit_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 45, "state": "DONE", "step_type": "agent_response", "duration_seconds": 3.620138072, "usage": {"input_tokens": 2350, "output_tokens": 116, "thinking_tokens": 22, "cache_read_tokens": 57052, "total_tokens": 2466}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 46, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 46, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.403379121, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}, "output": "Command exited with code 1.\n\nThere were sandbox errors that may or may not be related to the failure. If you think the failure is because of running in the sandbox, you can run the command again with `BypassSandbox` set to true to request explicit user permission.\n\nCommand output:\n[1022/114414.551565:ERROR:chrome/app/chrome_main_delegate.cc:1113] Remote debugging pipe file descriptors are not open.\r\nTraceback (most recent call last):\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 158, in <module>\r\n    test_scene()\r\n    ~~~~~~~~~~^^\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 85, in test_scene\r\n    call_cdp(1, 'Runtime.enable')\r\n    ~~~~~~~~^^^^^^^^^^^^^^^^^^^^^\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 70, in call_cdp\r\n    send_cdp(cmd_id, method, params)\r\n    ~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 40, in send_cdp\r\n    os.write(chrome_in_w, data)\r\n    ~~~~~~~~^^^^^^^^^^^^^^^^^^^\r\nBrokenPipeError: [Errno 32] Broken pipe\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 47, "state": "DONE", "step_type": "agent_response", "duration_seconds": 3.543922178, "usage": {"input_tokens": 3044, "output_tokens": 505, "thinking_tokens": 101, "cache_read_tokens": 57045, "total_tokens": 3549}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 48, "state": "ACTIVE", "step_type": "tool", "tool_name": "edit_file", "tool_info": {"name": "edit_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 48, "state": "DONE", "step_type": "tool", "tool_name": "edit_file", "duration_seconds": 0.065733082, "tool_info": {"name": "edit_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 49, "state": "DONE", "step_type": "agent_response", "duration_seconds": 1.939717102, "usage": {"input_tokens": 3702, "output_tokens": 118, "thinking_tokens": 15, "cache_read_tokens": 57039, "total_tokens": 3820}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 50, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 50, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.80422036, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}, "output": "Command exited with code 1.\n\nThere were sandbox errors that may or may not be related to the failure. If you think the failure is because of running in the sandbox, you can run the command again with `BypassSandbox` set to true to request explicit user permission.\n\nCommand output:\n[32:53:1022/114421.426263:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114421.426508:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.429: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.430: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.430: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.430: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.430: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.430: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.432: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.432: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.432: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.433: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.434: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.434: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[32:53:1022/114421.434324:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114421.434389:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114421.434424:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.434: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[32:53:1022/114421.451578:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:53:1022/114421.479172:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.479: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.482: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[32:87:1022/114421.489698:ERROR:content/browser/devtools/devtools_pipe_handler.cc:188] Connection terminated while reading from pipe\r\n\r\n(process:32): dconf-CRITICAL **: 11:44:21.493: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[32:32:1022/114421.546357:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114421.546438:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114421.546498:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114421.546523:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114421.546657:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:32:1022/114421.547318:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:32:1022/114421.568050:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:32:1022/114421.568289:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114421.568292:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114421.568320:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[32:53:1022/114421.568328:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114421.593802:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.Properties.GetAll: object_path= /org/freedesktop/UPower/devices/DisplayDevice: unknown error type: \r\n[32:32:1022/114421.593835:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114421.593893:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114421.599820:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[32:53:1022/114421.599878:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[32:32:1022/114421.607079:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\nTraceback (most recent call last):\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 155, in <module>\r\n    test_scene()\r\n    ~~~~~~~~~~^^\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 87, in test_scene\r\n    title = res['result']['result']['value']\r\n            ~~~^^^^^^^^^^\r\nKeyError: 'result'\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 51, "state": "DONE", "step_type": "agent_response", "duration_seconds": 5.152671246, "usage": {"input_tokens": 6910, "output_tokens": 226, "thinking_tokens": 41, "cache_read_tokens": 57046, "total_tokens": 7136}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 52, "state": "ACTIVE", "step_type": "tool", "tool_name": "edit_file", "tool_info": {"name": "edit_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 52, "state": "DONE", "step_type": "tool", "tool_name": "edit_file", "duration_seconds": 0.056230769, "tool_info": {"name": "edit_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 53, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.519104354, "usage": {"input_tokens": 3216, "output_tokens": 115, "thinking_tokens": 14, "cache_read_tokens": 61113, "total_tokens": 3331}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 54, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 54, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 2.308441711, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py"}, "output": "Command exited with code 1.\n\nThere were sandbox errors that may or may not be related to the failure. If you think the failure is because of running in the sandbox, you can run the command again with `BypassSandbox` set to true to request explicit user permission.\n\nCommand output:\n[33:54:1022/114430.906568:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.909: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.909: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.909: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.910: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.910: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.910: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.910: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.910: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.910: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.911: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.911: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.911: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.911: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[33:54:1022/114430.911807:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:54:1022/114430.911881:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:54:1022/114430.911929:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:54:1022/114430.912024:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:54:1022/114430.932913:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:54:1022/114430.963169:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.966: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.970: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[33:95:1022/114430.977458:ERROR:content/browser/devtools/devtools_pipe_handler.cc:188] Connection terminated while reading from pipe\r\n\r\n(process:33): dconf-CRITICAL **: 11:44:30.980: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[33:33:1022/114431.037726:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:33:1022/114431.037781:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114431.037803:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:54:1022/114431.037822:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114431.037895:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:33:1022/114431.038532:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114431.059353:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:54:1022/114431.059457:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[33:33:1022/114431.059623:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:33:1022/114431.059821:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114431.059872:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114431.092832:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.Properties.GetAll: object_path= /org/freedesktop/UPower/devices/DisplayDevice: unknown error type: \r\n[33:33:1022/114431.093107:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114431.093171:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114431.099494:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[33:54:1022/114431.099579:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[33:33:1022/114431.107485:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\nres for title: {'id': 3, 'method': 'Runtime.evaluate', 'params': {'expression': 'document.title', 'returnByValue': True}}\r\nTraceback (most recent call last):\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 154, in <module>\r\n    test_scene()\r\n    ~~~~~~~~~~^^\r\n  File \"/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_cdp.py\", line 99, in test_scene\r\n    print(\"Canvas check:\", canvas_check['result']['result']['value'])\r\n                           ~~~~~~~~~~~~^^^^^^^^^^\r\nKeyError: 'result'\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 55, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.591556209, "usage": {"input_tokens": 6465, "output_tokens": 243, "thinking_tokens": 197, "cache_read_tokens": 61119, "total_tokens": 6708}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 56, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "node -e \"console.log(process.version)\""}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 56, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.331238351, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "node -e \"console.log(process.version)\""}, "output": "Command exited with code 0.\n\nCommand output:\nv26.8.1\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 57, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.231533029, "usage": {"input_tokens": 2734, "output_tokens": 65, "thinking_tokens": 16, "cache_read_tokens": 65186, "total_tokens": 2799}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 58, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "npm list -g --depth=0 2>/dev/null"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 58, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.943394886, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "npm list -g --depth=0 2>/dev/null"}, "output": "Command exited with code 0.\n\nCommand output:\n/home/bob/.local/lib\r\n\u251c\u2500\u2500 @electron/asar@4.2.0\r\n\u251c\u2500\u2500 @expo/ngrok@4.1.3\r\n\u251c\u2500\u2500 @google/gemini-cli@0.65.0\r\n\u251c\u2500\u2500 @lucaperret/tidal-cli@1.1.2\r\n\u251c\u2500\u2500 @openai/codex@0.163.0\r\n\u251c\u2500\u2500 clawhub@0.9.0\r\n\u251c\u2500\u2500 electron@41.1.1\r\n\u251c\u2500\u2500 npm@11.15.0\r\n\u2514\u2500\u2500 openclaw@2026.10.5-beta.2\r\n\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 59, "state": "DONE", "step_type": "agent_response", "duration_seconds": 3.077051514, "usage": {"input_tokens": 3022, "output_tokens": 63, "thinking_tokens": 26, "cache_read_tokens": 65178, "total_tokens": 3085}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 60, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron -v"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 60, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.67893885, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron -v"}, "output": "Command exited with code 1.\n\nCommand output:\n[38:1022/114441.844498:FATAL:sandbox/linux/services/credentials.cc:131] Check failed: . : Function not implemented (38)\r\n/home/bob/.local/lib/node_modules/electron/dist/electron exited with signal SIGTRAP\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 61, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.926955938, "usage": {"input_tokens": 3256, "output_tokens": 66, "thinking_tokens": 21, "cache_read_tokens": 65170, "total_tokens": 3322}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 62, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron --no-sandbox -v"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 62, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.648298745, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron --no-sandbox -v"}, "output": "Command exited with code 0.\n\nCommand output:\n[37:1022/114445.286198:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\nv41.1.1\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 63, "state": "DONE", "step_type": "agent_response", "duration_seconds": 8.159583494, "usage": {"input_tokens": 3489, "output_tokens": 2657, "thinking_tokens": 423, "cache_read_tokens": 65162, "total_tokens": 6146}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 64, "state": "ACTIVE", "step_type": "tool", "tool_name": "write_file", "tool_info": {"name": "write_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_electron.js"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 64, "state": "DONE", "step_type": "tool", "tool_name": "write_file", "duration_seconds": 0.067319085, "tool_info": {"name": "write_file", "parameters": {"Path": "/home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_electron.js"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 65, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.052393129, "usage": {"input_tokens": 6217, "output_tokens": 119, "thinking_tokens": 16, "cache_read_tokens": 65167, "total_tokens": 6336}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 66, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron --no-sandbox /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_electron.js"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 66, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.654411575, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron --no-sandbox /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_electron.js"}, "output": "Command exited with code 1.\n\nCommand output:\n[36:1022/114456.063005:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[36:1022/114456.184183:ERROR:ui/ozone/platform/wayland/host/wayland_connection.cc:202] Failed to connect to Wayland display: No such file or directory (2)\r\n[36:1022/114456.184214:ERROR:ui/ozone/platform/wayland/ozone_platform_wayland.cc:281] Failed to initialize Wayland platform\r\n[36:1022/114456.184290:ERROR:ui/aura/env.cc:246] The platform failed to initialize.  Exiting.\r\n/home/bob/.local/lib/node_modules/electron/dist/electron exited with signal SIGSEGV\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 67, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.997997221, "usage": {"input_tokens": 2612, "output_tokens": 98, "thinking_tokens": 42, "cache_read_tokens": 69233, "total_tokens": 2710}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 68, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "which xvfb-run || electron --ozone-platform=headless --no-sandbox -v"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 68, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.529835794, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "which xvfb-run || electron --ozone-platform=headless --no-sandbox -v"}, "output": "Command exited with code 0.\n\nCommand output:\n[37:1022/114459.671530:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\nv41.1.1\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 69, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.70736802, "usage": {"input_tokens": 2878, "output_tokens": 137, "thinking_tokens": 34, "cache_read_tokens": 69224, "total_tokens": 3015}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 70, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron --ozone-platform=headless --no-sandbox /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_electron.js"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 70, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.88964168, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "electron --ozone-platform=headless --no-sandbox /home/bob/.gemini/antigravity-cli/brain/02a92fa8-b993-44ae-87ad-fe3112588d03/scratch/test_electron.js"}, "output": "Command exited with code 1.\n\nThere were sandbox errors that may or may not be related to the failure. If you think the failure is because of running in the sandbox, you can run the command again with `BypassSandbox` set to true to request explicit user permission.\n\nCommand output:\n[38:1022/114502.985363:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.104: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.105: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.105: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.105: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.105: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.105: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.105: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.106: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.106: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.106: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.106: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.106: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:38): dconf-CRITICAL **: 11:45:03.106: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[38:1022/114503.107508:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[38:1022/114503.107609:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[38:1022/114503.107640:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\nCheck 1 (self_contained): true (size=7118, hasUrl=false)\r\n\r\n(electron:38): dconf-CRITICAL **: 11:45:03.176: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n/home/bob/.local/lib/node_modules/electron/dist/electron exited with signal SIGSEGV\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 71, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.457318041, "usage": {"input_tokens": 4291, "output_tokens": 228, "thinking_tokens": 129, "cache_read_tokens": 69223, "total_tokens": 4519}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 72, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --virtual-time-budget=3000 --screenshot=/tmp/screen_3s.png file://$(pwd)/out/scene.html && ls -l /tmp/screen_3s.png"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 72, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.105423229, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --virtual-time-budget=3000 --screenshot=/tmp/screen_3s.png file://$(pwd)/out/scene.html && ls -l /tmp/screen_3s.png"}, "output": "Command exited with code 0.\n\nCommand output:\n[30:52:1022/114506.164628:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[30:52:1022/114506.164763:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.168: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.168: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.169: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.169: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.169: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.169: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.169: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.169: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.170: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.170: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.170: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.170: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.170: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[30:52:1022/114506.172328:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[30:52:1022/114506.172375:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[30:52:1022/114506.172391:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[30:52:1022/114506.192750:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[30:52:1022/114506.221231:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.221: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.225: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:30): dconf-CRITICAL **: 11:45:06.239: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[30:30:1022/114506.295043:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:30:1022/114506.295603:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:30:1022/114506.295950:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:52:1022/114506.297091:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[30:52:1022/114506.297145:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[30:30:1022/114506.297841:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:30:1022/114506.323145:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:52:1022/114506.323463:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[30:52:1022/114506.323505:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[30:30:1022/114506.323878:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:52:1022/114506.324028:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[30:30:1022/114506.350432:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.Properties.GetAll: object_path= /org/freedesktop/UPower/devices/DisplayDevice: unknown error type: \r\n[30:30:1022/114506.350457:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:52:1022/114506.350561:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[30:30:1022/114506.357765:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[30:52:1022/114506.357835:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[30:30:1022/114506.373436:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n\r\n(google-chrome-stable:30): dconf-CRITICAL **: 11:45:06.475: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:30): dconf-CRITICAL **: 11:45:06.475: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:30): dconf-CRITICAL **: 11:45:06.494: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:30): dconf-CRITICAL **: 11:45:06.545: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n57466 bytes written to file /tmp/screen_3s.png\r\n-rw-rw-rw- 1 bob bob 57466 Oct 22 11:45 /tmp/screen_3s.png\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 73, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.430101014, "usage": {"input_tokens": 3554, "output_tokens": 356, "thinking_tokens": 70, "cache_read_tokens": 73304, "total_tokens": 3910}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 74, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nfrom PIL import Image\nim1 = Image.open('/tmp/screen.png')\nim2 = Image.open('/tmp/screen_3s.png')\n\nassert im1.size == im2.size, 'Different sizes'\nw, h = im1.size\ntotal_pixels = w * h\n\np1 = list(im1.getdata())\np2 = list(im2.getdata())\n\ndiff_pixels = 0\nfor a, b in zip(p1, p2):\n    # Check if pixel changed significantly\n    if any(abs(c1 - c2) > 5 for c1, c2 in zip(a[:3], b[:3])):\n        diff_pixels += 1\n\ndiff_ratio = diff_pixels / total_pixels\nprint(f'Total pixels: {total_pixels}')\nprint(f'Diff p\u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 74, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.436628928, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nfrom PIL import Image\nim1 = Image.open('/tmp/screen.png')\nim2 = Image.open('/tmp/screen_3s.png')\n\nassert im1.size == im2.size, 'Different sizes'\nw, h = im1.size\ntotal_pixels = w * h\n\np1 = list(im1.getdata())\np2 = list(im2.getdata())\n\ndiff_pixels = 0\nfor a, b in zip(p1, p2):\n    # Check if pixel changed significantly\n    if any(abs(c1 - c2) > 5 for c1, c2 in zip(a[:3], b[:3])):\n        diff_pixels += 1\n\ndiff_ratio = diff_pixels / total_pixels\nprint(f'Total pixels: {total_pixels}')\nprint(f'Diff p\u2026"}, "output": "Command exited with code 1.\n\nCommand output:\nTraceback (most recent call last):\r\n  File \"<string>\", line 6, in <module>\r\n    assert im1.size == im2.size, 'Different sizes'\r\n           ^^^^^^^^^^^^^^^^^^^^\r\nAssertionError: Different sizes\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 75, "state": "DONE", "step_type": "agent_response", "duration_seconds": 2.6153418999999998, "usage": {"input_tokens": 4055, "output_tokens": 104, "thinking_tokens": 19, "cache_read_tokens": 73297, "total_tokens": 4159}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 76, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nfrom PIL import Image\nprint('im1:', Image.open('/tmp/screen.png').size)\nprint('im2:', Image.open('/tmp/screen_3s.png').size)\n\""}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 76, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.349269895, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "python3 -c \"\nfrom PIL import Image\nprint('im1:', Image.open('/tmp/screen.png').size)\nprint('im2:', Image.open('/tmp/screen_3s.png').size)\n\""}, "output": "Command exited with code 0.\n\nCommand output:\nim1: (800, 600)\r\nim2: (780, 493)\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 77, "state": "DONE", "step_type": "agent_response", "duration_seconds": 10.226348011, "usage": {"input_tokens": 4280, "output_tokens": 404, "thinking_tokens": 42, "cache_read_tokens": 73289, "total_tokens": 4684}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 78, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --window-size=800,600 --virtual-time-budget=3000 --screenshot=/tmp/screen_3s.png file://$(pwd)/out/scene.html && python3 -c \"\nfrom PIL import Image\nim1 = Image.open('/tmp/screen.png')\nim2 = Image.open('/tmp/screen_3s.png')\n\nassert im1.size == im2.size, f'{im1.size} != {im2.size}'\nw, h = im1.size\ntotal_pixels = w * h\n\np1 = list(im1.getdata())\np2 = list(im2.getdata())\n\ndiff_pixels = 0\nfor a, b in zip(p1, p2):\n    if any(abs(c1 - c2) > 5 for c1, c2\u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 78, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.420753473, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "google-chrome-stable --headless=new --no-sandbox --disable-gpu --window-size=800,600 --virtual-time-budget=3000 --screenshot=/tmp/screen_3s.png file://$(pwd)/out/scene.html && python3 -c \"\nfrom PIL import Image\nim1 = Image.open('/tmp/screen.png')\nim2 = Image.open('/tmp/screen_3s.png')\n\nassert im1.size == im2.size, f'{im1.size} != {im2.size}'\nw, h = im1.size\ntotal_pixels = w * h\n\np1 = list(im1.getdata())\np2 = list(im2.getdata())\n\ndiff_pixels = 0\nfor a, b in zip(p1, p2):\n    if any(abs(c1 - c2) > 5 for c1, c2\u2026"}, "output": "Command exited with code 0.\n\nCommand output:\n[31:52:1022/114523.146550:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.149: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.149: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.150: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.151: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.151: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[31:52:1022/114523.151562:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:52:1022/114523.151626:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[31:52:1022/114523.151837:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[31:52:1022/114523.151918:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:52:1022/114523.177255:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:52:1022/114523.206066:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.206: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.209: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(process:31): dconf-CRITICAL **: 11:45:23.219: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n[31:31:1022/114523.258484:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:31:1022/114523.258559:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:31:1022/114523.258697:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:52:1022/114523.258989:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:52:1022/114523.259004:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:31:1022/114523.259534:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:52:1022/114523.279077:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[31:52:1022/114523.279133:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory\r\n[31:31:1022/114523.281358:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:31:1022/114523.281506:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:52:1022/114523.281559:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:31:1022/114523.299356:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.Properties.GetAll: object_path= /org/freedesktop/UPower/devices/DisplayDevice: unknown error type: \r\n[31:31:1022/114523.300984:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:52:1022/114523.301113:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:31:1022/114523.312675:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n[31:52:1022/114523.312867:ERROR:dbus/bus.cc:405] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are \"tcp\" and on UNIX \"unix\")\r\n[31:31:1022/114523.328481:ERROR:dbus/object_proxy.cc:572] Failed to call method: org.freedesktop.DBus.NameHasOwner: object_path= /org/freedesktop/DBus: unknown error type: \r\n\r\n(google-chrome-stable:31): dconf-CRITICAL **: 11:45:23.457: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:31): dconf-CRITICAL **: 11:45:23.460: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:31): dconf-CRITICAL **: 11:45:23.470: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n\r\n(google-chrome-stable:31): dconf-CRITICAL **: 11:45:23.508: unable to create directory '/run/user/1000/dconf': Read-only file system.  dconf will not work properly.\r\n57145 bytes written to file /tmp/screen_3s.png\r\nTotal pixels: 480000\r\nDiff pixels: 69373 (14.45%)\r\nCheck frames_change passed (> 0.1%): True\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 79, "state": "DONE", "step_type": "agent_response", "duration_seconds": 4.622630962, "usage": {"input_tokens": 3723, "output_tokens": 1031, "thinking_tokens": 144, "cache_read_tokens": 77371, "total_tokens": 4754}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 80, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "node -e \"\nconst fs = require('fs');\nconst html = fs.readFileSync('out/scene.html', 'utf8');\n\n// Extract script\nconst scriptContent = html.match(/<script>([\\s\\S]*?)<\\/script>/)[1];\n\n// Mock browser globals\nconst window = {};\nglobal.window = window;\nglobal.document = {\n  getElementById: (id) => ({\n    getContext: () => ({\n      clearRect: () => {},\n      createLinearGradient: () => ({ addColorStop: () => {} }),\n      fillRect: () => {},\n      save: () => {},\n      restore: () => {},\n      beginPath: () => {},\u2026"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 80, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 1.8349292350000002, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "node -e \"\nconst fs = require('fs');\nconst html = fs.readFileSync('out/scene.html', 'utf8');\n\n// Extract script\nconst scriptContent = html.match(/<script>([\\s\\S]*?)<\\/script>/)[1];\n\n// Mock browser globals\nconst window = {};\nglobal.window = window;\nglobal.document = {\n  getElementById: (id) => ({\n    getContext: () => ({\n      clearRect: () => {},\n      createLinearGradient: () => ({ addColorStop: () => {} }),\n      fillRect: () => {},\n      save: () => {},\n      restore: () => {},\n      beginPath: () => {},\u2026"}, "output": "Command exited with code 0.\n\nCommand output:\nwindow.sceneState defined: true\r\nFish count: 4\r\nBubble count: 12\r\nFish movements over 1.5s:\r\n  Fish 0: d = 190.21px, inside = true\r\n  Fish 1: d = 163.53px, inside = true\r\n  Fish 2: d = 187.75px, inside = true\r\n  Fish 3: d = 167.40px, inside = true\r\nFish check pass: true\r\nBubble movements over 1.5s:\r\n  Bubble 0: y1=449.9, y2=416.7, diff=33.2 (up: true)\r\n  Bubble 1: y1=37.4, y2=4.2, diff=33.2 (up: true)\r\n  Bubble 2: y1=74.9, y2=41.7, diff=33.2 (up: true)\r\n  Bubble 3: y1=112.4, y2=79.2, diff=33.2 (up: true)\r\n  Bubble 4: y1=149.9, y2=116.7, diff=33.2 (up: true)\r\n  Bubble 5: y1=187.4, y2=154.2, diff=33.2 (up: true)\r\n  Bubble 6: y1=224.9, y2=191.7, diff=33.2 (up: true)\r\n  Bubble 7: y1=262.4, y2=229.2, diff=33.2 (up: true)\r\n  Bubble 8: y1=299.9, y2=266.7, diff=33.2 (up: true)\r\n  Bubble 9: y1=337.4, y2=304.2, diff=33.2 (up: true)\r\n  Bubble 10: y1=374.9, y2=341.7, diff=33.2 (up: true)\r\n  Bubble 11: y1=412.4, y2=379.2, diff=33.2 (up: true)\r\nBubble up share: 100.0% (pass: true)\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 81, "state": "DONE", "step_type": "agent_response", "duration_seconds": 7.750681351, "usage": {"input_tokens": 5399, "output_tokens": 122, "thinking_tokens": 86, "cache_read_tokens": 77371, "total_tokens": 5521}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 82, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "git status"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 82, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.321969287, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "git status"}, "output": "Command exited with code 128.\n\nCommand output:\nfatal: not a git repository (or any parent up to mount point /)\r\nStopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 83, "state": "DONE", "step_type": "agent_response", "duration_seconds": 3.028859701, "usage": {"input_tokens": 5653, "output_tokens": 88, "thinking_tokens": 46, "cache_read_tokens": 77363, "total_tokens": 5741}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 84, "state": "ACTIVE", "step_type": "tool", "tool_name": "run_command", "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la && ls -la out"}}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 84, "state": "DONE", "step_type": "tool", "tool_name": "run_command", "duration_seconds": 0.718095598, "tool_info": {"name": "run_command", "parameters": {"CommandLine": "ls -la && ls -la out"}, "output": "Command exited with code 0.\n\nCommand output:\ntotal 24\r\ndrwxr-xr-x 4 bob bob 4096 Oct 22 11:17 .\r\ndrwxrwxr-x 3 bob bob 4096 Oct 22 11:41 ..\r\n-rw-r--r-- 1 bob bob 2575 Oct 22 11:17 TASK.md\r\ndrwxr-xr-x 2 bob bob 4096 Oct 22 11:17 ask\r\ndrwxr-xr-x 2 bob bob 4096 Oct 22 11:43 out\r\n-rw-r--r-- 1 bob bob  117 Oct 22 11:17 spec.json\r\ntotal 16\r\ndrwxr-xr-x 2 bob bob 4096 Oct 22 11:43 .\r\ndrwxr-xr-x 4 bob bob 4096 Oct 22 11:17 ..\r\n-rw-r--r-- 1 bob bob 7118 Oct 22 11:43 scene.html\r\n"}}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "The animated fish"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " tank scene has been created in [`out/scene.html"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "`](file:///h"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ome/bob/usecase-runs/agy"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "-batch/out/gemini-3.8-flash-medium/d"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "01/work/out/scene.html)."}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "\n\n### Summary of Implementation\n- **"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "Self-contain"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ed HTML**: All styles, c"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "anvas drawing routines, and animatio"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "n logic are completely inline within [`out/scene"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": ".html`](file:///home/bob"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "/usecase-run"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "s/agy-batch/out/gemini-3"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": ".8-flash-med"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ium/d01/work/out/scene.html) (7,118 bytes, well "}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "below the 20"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "0 KB limit), with zero e"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "xternal resources, fonts, or network URLs.\n- **S"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "tage & Contr"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "act Compliance**:\n  - Title matches `spec.json` "}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "(`<title>Aqu"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "arium 438</title>`).\n  -"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " Single `<canvas>` stage"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " rendered at"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " 700x450 CSS pixels (exceeding the 300x200 minim"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "um).\n  - Bac"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "kground features ambient"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " water gradients, causti"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "c light rays, underwater plants, and"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " a sandy tank floor.\n- *"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "*Fish Motion"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "**:\n  - Renders exactly 4 fish with distinct col"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ors, animated fins, and "}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "wiggling tai"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ls facing their movement"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " vectors.\n  - Fish swim along ellipt"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ical paths with displace"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ment over 1.5 s strictly greater than 70 px (exc"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "eeding the >"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": " 2 px threshold) while remaining within tank bou"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "nds.\n- **Bub"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ble Motion**:\n  - 12 bubbles (exceeding `min_bub"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "bles: 8`) ri"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "se upward at constant ve"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "rtical rates, wrapping seamlessly at the top whi"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "le preservin"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "g their array indices.\n  - Over any 1.5 s interv"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "al, $\\ge 91.7\\%$ of bubbles move upw"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "ACTIVE", "step_type": "agent_response", "text_delta": "ard ($y$ decreases by $\\"}}
{"event": "step_update", "step_update": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "step_index": 85, "state": "DONE", "step_type": "agent_response", "text_delta": "approx 33$ px), well exceeding the 60% requirement.\n- **Scene State API**:\n  - Exposes `window.sceneState()` returning `{ fish: [{x, y}, ...], bubbles: [{x, y}, ...] }` in stage pixel coordinates describing what is drawn.\n", "duration_seconds": 4.904917939, "usage": {"input_tokens": 6093, "output_tokens": 1158, "thinking_tokens": 701, "cache_read_tokens": 77356, "total_tokens": 7251}}}
{"event": "result", "result": {"conversation_id": "02a92fa8-b993-44ae-87ad-fe3112588d03", "status": "SUCCESS", "response": "The animated fish tank scene has been created in [`out/scene.html`](file:///home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/out/scene.html).\n\n### Summary of Implementation\n- **Self-contained HTML**: All styles, canvas drawing routines, and animation logic are completely inline within [`out/scene.html`](file:///home/bob/usecase-runs/agy-batch/out/gemini-3.8-flash-medium/d01/work/out/scene.html) (7,118 bytes, well below the 200 KB limit), with zero external resources, fonts, or network URLs.\n- **Stage & Contract Compliance**:\n  - Title matches `spec.json` (`<title>Aquarium 438</title>`).\n  - Single `<canvas>` stage rendered at 700x450 CSS pixels (exceeding the 300x200 minimum).\n  - Background features ambient water gradients, caustic light rays, underwater plants, and a sandy tank floor.\n- **Fish Motion**:\n  - Renders exactly 4 fish with distinct colors, animated fins, and wiggling tails facing their movement vectors.\n  - Fish swim along elliptical paths with displacement over 1.5 s strictly greater than 70 px (exceeding the > 2 px threshold) while remaining within tank bounds.\n- **Bubble Motion**:\n  - 12 bubbles (exceeding `min_bubbles: 8`) rise upward at constant vertical rates, wrapping seamlessly at the top while preserving their array indices.\n  - Over any 1.5 s interval, $\\ge 91.7\\%$ of bubbles move upward ($y$ decreases by $\\approx 33$ px), well exceeding the 60% requirement.\n- **Scene State API**:\n  - Exposes `window.sceneState()` returning `{ fish: [{x, y}, ...], bubbles: [{x, y}, ...] }` in stage pixel coordinates describing what is drawn.\n", "duration_seconds": 253.173946113, "num_turns": 1, "usage": {"input_tokens": 253775, "output_tokens": 44632, "thinking_tokens": 29955, "cache_read_tokens": 2000249, "total_tokens": 298407}}}

Get new runs and ranking changes weekly